Local Area Connection Doesn't Have a Valid IP Configuration [MiniTool Tips]

If you failed to access the Internet, then you may see the following messages:

• Ethernet doesn’t have a valid IP configuration .
• WiFi doesn't have a valid IP configuration .
• Local Area Connection doesn’t have a valid IP configuration.

This post focuses on the last issue and gathers several efficient solutions. Now follow the guide below to deal with the problem.

Method 1: Change the Value of Your Network Connection

Local Area connection does not have a valid IP configuration? Don’t worry. You can try to change the value of your network connection to solve the problem. Now follow the instructions below to do that:

Step 1: Press the Win + I keys at the same time to open Settings . Choose Network & Internet .

Step 2: Go to the Status tab and then click Change adapter options in the right panel.

Step 3: Right-click the network adapter that you are using to choose Properties .

Step 4: Click Configure… and then go to the Advanced tab. Choose Network Address under the Property section and then change its value to random 12 alphanumeric characters . Here we take 20GF23FE8630 as an example, and then click OK to save changes.

Step 5: Restart your computer to check if you can connect to the Internet.

Method 2: Reinstall Your Network Adapter Driver

If your network adapter driver is outdated or corrupted, then you can receive the error message - Local Area Connection doesn't have a valid IP configuration. In this case, you can try to reinstall your network adapter driver to fix the error. Here is a quick guide on how to do that:

Step 1: Press the Win + X keys at the same time to choose Device Manager .

Step 2: Expand Network adapters and right-click the adapter that you are using to choose Uninstall device .

Step 3: Click Uninstall to confirm the uninstallation. And if available, check Delete driver software for this device and click OK .

Step 4: Restart your computer, and the system will automatically install the default network driver. Then check if the error is fixed.

Method 3: Change Network Adapter Settings

The last method you can try to fix “Local Area Connection doesn't have a valid IP configuration” is to change network adapter settings. Now follow the steps below to do that:

Step 1: Press the Win + R keys at the same time to open the Run box.

Step 2: Type ncpa.cpl in the box and then click OK to open Network Connections .

Step 3: Locate your network connection, right-click it to choose Properties .

Step 4: In the Properties window, choose Internet Protocol Version 4 (TCP/IPv4) and then click Properties .

Step 5: Choose Obtain an IP address automatically and Obtain DNS server address automatically . Click OK to save changes.

Now you can restart your computer to check if the error appears again. If the error still persists, then follow the guide below:

1. In the Internet Protocol Version 4 (TCP/IPv4) Properties window, choose Use the following IP address , then enter the IP address, Subnet mask, Default gateway .
2. Then choose Use the following DNS server addresses , enter Preferred DNS server and Alternate DNS server . Click OK to save changes and then check if the error is fixed.

The End

This post is mainly talking about how to fix Local Area Connection doesn't have a valid IP configuration, so if you meet the error, don’t hesitate to try these methods mentioned in this post.