[Overview] ISDN: Meaning/Advantages/Interfaces/Reference Points [MiniTool Wiki]
What Does ISDN Stand For?
What Is ISDN?
Integrated Services Digital Network (ISDN) is a set of communication standards for simultaneous digital transmission of data, voice, video, as well as other Internet services via the digitalized circuits of the public switched telephone network.
Work on ISDN began in 1980 and was formally standardized in 1988. By the time ISDN was released, newer faster networking systems were already available. ISDN took fewer market share then and only 25 million subscribers at a time in its peak period worldwide when 1.3 billion analog lines were in use. ISDN has largely been replaced with a DSL (Digital Subscriber Line) system with much better performance.
Advantages of ISDN
Part of the full name of ISDN, “integrated services”, indicates that it can deliver as least 2 connections simultaneously, in any combination of data, video, voice, and fax over a single line. Thus, multiple devices are allowed to be connected to the line.
Therefore, the ISDN network can satisfy most users’ needs of complete communication, except for broadband Internet access and entertainment television, at a much faster transferring speed without having to buy multiple analog phone lines.
Also, ISDN integrates transmission and switching in a carrier wave and telephone switching.
ISDN Rate Interfaces
There are two types of rate interfaces for ISDN protocol, basic and primary.
Basic Rate Interface (ISDN BRI)
Basic rate interface (BRI) is the entry-level interface to the ISDN line , a 128 kbit/s service transferred through a pair of standard telephone copper wires. The 144 kbit/s overall payload rate is divided into one 16 kbit/s signaling channel (data channel or “d” channel) and two 64 kbit/s bearer channels (“b” channels). Sometimes, that is referred to as 2b+d.
BRI-ISDN specifies below network interfaces:
- T interface: It is a serial interface between a computing device and a terminal adapter (TA), which is the digital equivalent of a modem .
- U interface: It is a 2-wire interface between the exchange and a network terminating unit, which is usually the demarcation point in non-North American networks.
- S interface: It is a 4-wire bus that ISDN consumer devices are connected to. The S & T reference points are usually implemented as a single interface labeled “S/T” on a network termination 1 (NT1).
- R interface: It is the point between a non-ISDN device and a TA that provides translation to and from such a device.
What is a network security key? How to find network security key on your computer? This post shows you the detailed guides.
Primary Rate Interface (ISDN PRI)
The primary rate interface is the other ISDN interface access that is carried over T-carrier (T1) with 24-time channels or slots in North American and over E-carrier (E1) with 32 channels in most other countries, each channel offers a 64 kbit/s data transferring speed.
The available channels of the E1 carrier are divided into 30 bearer (b) channels, 1 data (d) channel, and 1 timing and alarm channel. This plan is usually referred to as 30B+2D.
Broadband Integrated Services Digital Network (B-ISDN)
B-ISDN is the most advanced form of ISDN Internet designed to scale up to hundreds of Mbps. Running over fiber optic cables and using asynchronous transfer mode (ATM) as its switching technology, yet, it has never become the mainstream network.
ISDN Reference Points
Reference points defined by ISDN standard refer to certain points between the end-user ISDN equipment and the telephone company.
- R: The point between a TA and a non-ISDN terminal equipment 2 (TE2).
- S: The point between a network termination type 2 (NT2) device and the ISDN terminal equipment 1 (TE1) or TA.
- T: The point between network termination 1 (NT1) and the NT2